Straight answers, the same for every coin. Numbers on this page are live from the pool.
Two ways, your choice:
Either way, you are paid when your balance reaches the minimum for that payout.
BTC 0.0005, USDC 5, USDT 5. Paid in the coin, the minimum depends on the coin:
The minimum is there so the network fee on each payout stays a tiny part of it. The pool pays that network fee.
PPLNS: everyone shares every block the pool finds, by how much work they did recently. Steady income.
SOLO: you only get paid if your rig finds a block, and then you get the whole reward (minus the 1% fee). Big but rare.
BTC, USDC and USDT payouts are for PPLNS. A SOLO block always pays the coin straight to you.
Rabid Pool puts miners first. The pool fee is 1%, and that's all I keep. When you choose BTC, USDC or USDT, I sell your coins at the exchange and pass every exchange cost through at exactly what it cost, with no markup. I also time the transfers to keep those costs as small as possible. Measured on KAS: USDT about …, USDC about …, BTC about … on top of the 1%. The pool pays the network fee on your payout.
Other pools that swap your coins cost you more. Rabid Pool has miners in mind and keeps fees as low as possible, so you earn as much as possible:
Yes. 1% on every coin, PPLNS and SOLO. No promos that change it later, no hidden fees.
No. You get what the exchange gives for your coins, minus the exchange's own fees at exactly what they cost, shared by how much each miner had in that batch. Every number is published on the fees page, measured from real swaps.
USDT. Your coins are sold for USDT anyway, so nothing else has to be bought, and on BNB Smart Chain sending it out costs 0.01 USDT. Ethereum and Solana cost a little more to withdraw from the exchange (roughly 0.2 to 0.4 per batch, shared by everyone in it); each payout card on the coin page shows the exact figure. USDC adds a small USDT to USDC swap. BTC adds a USDT to BTC buy and a bigger exchange withdrawal fee.
The exchange charges a flat fee every time BTC leaves it (about 0.00002 BTC). Sending small amounts made that about 2.5% of your money. I now wait until there is at least 0.002 BTC to send, so it is about 1% or less. You wait a day or two longer and keep more.
The same on every coin that swaps: put the asset in front of the address you want to be paid at, as your login.
btc: + your Bitcoin address, e.g. btc:bc1q….rig1usdc: + your BNB Smart Chain (BEP20) address, e.g. usdc:0x….rig1usdt: + your BNB Smart Chain (BEP20) address, e.g. usdt:0x….rig1usdc-eth: or usdt-eth: + your Ethereum (ERC20) address, e.g. usdc-eth:0x….rig1usdc-sol: or usdt-sol: + your Solana wallet address, e.g. usdt-sol:4crUvf….rig1. Never a token account, and never guessed from the address alone.Password x. PPLNS ports only. A plain 0x… is USDC on Kaspa and Quantus; on ETC it is ETC, so write usdc:0x… there. Your login decides how you are paid: nothing is saved on the pool for it, so there is nothing to set up first and nothing to wait for. Logins that already work keep working.
Merge coins. Swapping? One address covers everything: on Kaspa your ZKAS is swapped and paid to the same address, and on Litecoin your DOGE is. SOQ is never swapped: add soq=<your SOQ address> to the password if you want it. Mining to your own wallets instead? With no merge addresses set you are paid the main coin only. On Kaspa put your ZKAS address (zkas:…) in the password; on Litecoin put doge=<address>,soq=<address>. Each rig’s password decides where that rig’s merge coins go, so put it on every rig.
The "Start mining" steps on each coin page build this for you.
You choose. BNB Smart Chain (BEP20) is the default and the cheapest. On Kaspa/ZKAS, Quantus, ETC and Pearl you can also take Ethereum (ERC20) or Solana (SPL): pick the card with that network on the coin's page, and the page builds your login. A plain 0x… login is always USDC on BNB Smart Chain.
Make sure your wallet or exchange accepts that token on that network before you mine to it, and check the exchange's minimum deposit. Sending to an address that only accepts another network can lose the money. Solana addresses have no built-in check, so a mistyped one can still look valid: compare the first and last 6 characters with your wallet.
Yes, but check three things first: the exchange accepts that coin on that network, its minimum deposit is below the pool's minimum payout, and that deposit address is not going to change. Exchanges sometimes rotate addresses or stop supporting a coin.
Yes. Change the login on your miner: btc:, usdc: or usdt: in front of the address, or just your coin's own address to be paid in the coin. Your login decides how you are paid, so nothing is saved on the pool to change and there is nothing to wait for.
Your swap happens once, when the batch is sold, in whatever you picked at that moment. Changing does not cost an extra swap.
A PIN only protects your payout size (the pay= setting). It has nothing to do with where you are paid any more, so you do not need one to keep your payout safe. If you set a payout size, add pin=1234 (your own number) to your miner's password once, and nobody can change that size without the PIN. Keep it somewhere safe; an admin has to reset a lost one.
No. Where you are paid comes from the login of each rig, so a rig that mines with your address only ever pays that address. Someone who mines with your address cannot move your coins; on Kaspa and Litecoin, a stranger who puts his own merge address in his own password only gets the merge coins of his own hashrate. There is nothing saved to lock and no 72 hour wait.
Paid in the coin: no. The block reward pays your address directly.
Paid in BTC, USDC or USDT: the pool holds your coins only as long as it takes to sell them and send the result, usually hours, plus the wait for the BTC lump. Every swap and payout is in the public numbers, and your payouts show on your stats page with links to the blockchain.
Look up your address on the coin page ("My stats"). Each payout has a transaction link you can open on a public block explorer.
Newly mined XBT is locked by the chain for 180 days before it can move. It can't be sold in time to pay you in BTC, USDC or USDT, so XBT pays XBT only.
It already is BTC. Swapping it would only add costs.
There is no exchange I can sell them on yet. They pay the coin. If a good exchange lists one, I'll add the swap.
BCH, LTC and DOGE swaps are live now (PPLNS only). On LTC your DOGE follows the same choice. ZEC and XMR are planned: the exchange I use for the others does not take them, so I have to set up a different one first. Each one goes live only after a real test payout.
On coins paid straight from the block, they carry forward. A block can only hold so many payouts, and a payout below the network's dust limit can't be created at all, so there is a minimum per block. Anything under it is recorded as a claim and paid from the next block that clears the floor. Nothing is discarded. It is a claim on future blocks, not coins I am holding for you. The only way to lose it is to stop mining forever before it clears, and it is capped at the floor amount (a few cents).
On coins where the pool sends the payout itself, a balance below the minimum simply waits until it reaches it.
When the pool finds a block, its reward is split across miners by their PPLNS shares, with the 1% fee taken from the same reward. Once the block has matured (about 100 confirmations on most coins; XBT is locked by the chain for about 180 days) the coins are yours. On coins that can pay straight from the block there is no withdrawal step and no payout fee: the chain pays you. On the others, the pool sends your share in batches once your balance reaches the minimum. Each coin's page says which way it works.
On most coins, yes. XBT: with the SOLO switch in the Rabid node (DATUM port 28926). BCH :4334, BTC :5334, BTC1 :6534, XMR :7334, LTC+DOGE :9434, ZEC :9634, KAS :5556, QTC :9734, PRL :9934, ETC :9534, ZMR :9034. A block your hashrate solves pays the finder directly. Nothing is shared and nothing waits on a payout window. On LTC+DOGE a solved LTC block pays your LTC address and a solved DOGE block pays the DOGE address you gave, each its own block. Solo is all or nothing, so at a small hashrate the gaps between blocks are very long. That is what PPLNS smooths out. PCoin is PPLNS only. Each coin's Start mining tab shows the exact login.
BCH, BTC, BTC1 and KAS have their own rental ports: use the ones listed on that coin's Start mining tab. For XBT, point the rented rig at your own DATUM node's stratum port (23334 on the PC running it), not at the pool. Your shares stay in the PPLNS window after the rental ends, so you are still paid when the next block lands. More on the rent hashpower page.
Several of these chains share Bitcoin's address format. Exchanges generally reject block payments and the coins can't be recovered. Only mine to a wallet you control, or a deposit address the exchange generated for that exact coin. To be paid on an exchange, use the BTC, USDC or USDT login described above instead.
Test pools for brand-new or speculative chains. High risk, possibly unstable, possibly won't pay: run only hashrate you can afford to lose. See Experimental Coins on the home page.
Maybe. New coins are added based on miner demand. The stack is already multi-coin, so it's a configuration change rather than a rebuild. Request a coin.